Outdoor Wiegand Proximity Card Readers ( for exit)

It can work with power supply,also can connected with the electronic lock,access control panel

Users Manual for RFID Card Reader

Specification

Working Voltage  DC 9V-16VStatic Current ≤80mAReading Range 5~10CMSupport EM-ID,M1card,15693card,and 1443A,1443B CardAmbient Temperature -10°C~50°CAmbient Humidity 10%~90%International Standard Wiegand Interfacesmall than 100M Communication Distance

Installation

Using “+”type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

WG26/34       RS485         RS232 Red DC 9V-16V   Red  DC 9V-16V  Red  DC 9V-16VBlack GND       Black GND       Black GNDGree  D0        Green 4R+      Green RXWhite D1        White 4R-      White TXBlue LEDYellow BEEPgray :ringpurple:ring

Notice! 

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply2. When external Power is used, make sure sharing the power with Controller Box or using the same GND3. The wire connects reader to controller, advise use 8 cores stranded twisted pair cable(among them, three strands are spare, if no need reader show illegal card s by sound and light, LED wire can not be used, data wire  Data1 Data0 are twisted pair would be better, we suggest sectional area are 0.22 square millimeter at least. The length should not exceed 100meters.shielded wire connect to GND o

Accessories

User Manual                 1certificate of compliance        1